Skilled Job Vacancies at Marconi Nigeria EPC Limited

27

At Marconi, our mission is to excel in Nigeria’s engineering, procurement, and fabrication sector by consistently delivering high-quality products on time, upholding local content regulations, and maintaining world-class standards for our clients.

Applications are invited from suitably qualified candidates to join our team in the following Categories below.

1. BLASTERS & PAINTERS

• Department/Division: Corrosion Control
• Reports To:Coating Foreman

Job Summary

Blasters & Painters perform surface preparation via abrasive blasting and apply industrial coatings to steel structures.

Responsibilities

• Operate blasting equipment to remove rust/old paint.
• Clean surfaces using power tools or solvents.
• Mix paints according to manufacturer instructions.
• Apply coatings using brush, roller, or airless spray guns.
• Maintain cleaning of spray equipment.

Requirements:

• SSCE/WAEC.
• Trade Test I, II, III.
• Minimum 3 years experience.
• Technical Skills & Competencies
• Proficient in spray gun handling.
• Knowledge of pot life and induction times.
• Uniformity of coating thickness.
• Safety adherence.
• Requires wearing full protective hoods and suits.
• Physical Requirements: Ability to hold high-pressure blast hoses.

2. RIGGERS

• Department/Division:Lifting & Hoisting
• Reports To:Rigging Foreman

Job Summary

Riggers attach loads to lifting equipment using slings, shackles, and chains ensuring safe movement of materials.

Responsibilities:

• Select gear (slings, shackles) as directed by Foreman.
• Attach loads to crane hooks safely.
• Use tag lines to control load rotation.
• Properly store rigging gear after use.
• Watch for overhead obstructions.

Requirements:

• SSCE/WAEC.
• Trade Test I, II, III.
• Professional Certifications & Licenses
• Basic Rigger Training (OPITO Level 1 desirable).
• Minimum 2-3 years experience.

Technical Skills & Competencies

• Knot tying.
• Team coordination.
• Adherence to safety instructions.
• Outdoors, hazardous environment.
• Heavy lifting and pulling.

3. QUALITY INSPECTORS (DISCIPLINE) – PIPING/MECH/STRUCTURAL

• Department/Division:QA/QC
• Reports To:QA/QC Manager

Job Summary

Quality Inspectors verify that construction and fabrication activities meet project specifications, codes, and standards. They are the primary authority for accepting or rejecting work.

Responsibilities:

• Perform visual inspections of welds, fit-ups, and installations.
• Witness NDT (RT, UT, MT, PT) and review results.
• Verify material traceability (Heat numbers).
• Monitor hydro-tests and pneumatic tests.
• Prepare Non-Conformance Reports (NCR) for defective work.
• Compile Final Documentation Dossiers (As-built data).
• Ensure compliance with ITP (Inspection and Test Plan).

Requirements:

• HND/B.Sc. in Engineering (Mechanical/Civil/Metallurgical).
• Professional Certifications & Licenses
• CSWIP 3.1/3.2 or AWS CWI.
• ASNT Level II in RT, UT, MT, PT.
• COREN (added advantage).
• Experience Requirements
• Minimum 7 years in QA/QC roles.
• Technical Skills & Competencies
• Deep knowledge of ASME, API, and AWS codes.
• Report writing skills.
• Detection rate of defects.
• Timely closure of NCRs.
• Site and office.
• Accessing difficult areas for inspection.

​4. COATING SUPERVISOR

• Department/Division:Corrosion Control
• Reports To:Construction/Maintenance Manager

Job Summary

The Coating Supervisor oversees surface preparation and painting/coating application to ensure corrosion protection of assets in compliance with NACE/SSPC standards.

Responsibilities:

• Plan and supervise blasting and painting activities.
• Ensure climatic conditions (Relative Humidity, Dew Point) are suitable for coating.
• Inspect surface profile after blasting.
• Monitor wet and dry film thickness (WFT/DFT).
• Manage paint inventory and ensure correct mixing ratios.
• Ensure proper disposal of hazardous waste (grit, paint cans).
• Prepare coating inspection reports.

Requirements:

• HND/B.Sc. in Chemistry or Engineering (desirable).
• Professional Certifications & Licenses
• NACE CIP Level 2 or SSPC PCI Level 2.
• ICorr Level 2.
• Minimum 8 years in industrial coating application.

Technical Skills & Competencies

• Knowledge of various coating systems (Epoxy, Polyurethane, Zinc).
• Use of inspection tools (Elcometer, Bresle patch).
• Quality of coating (Pass rate of Holiday testing).
• Productivity (sqm/day).
• Exposure to chemical fumes and dust.
• Normal color vision.

5. RIGGING SUPERVISOR

• Department/Division:Lifting & Hoisting
• Reports To:Construction/Site Manager

Job Summary

The Rigging Supervisor plans and oversees all lifting operations, ensuring they are conducted safely and in compliance with LOLER and Nigerian lifting regulations.

Responsibilities:

• Develop Critical Lift Plans.
• Supervise complex lifts involving cranes and multiple lifting points.
• Inspect rigging gear (shackles, slings, chain blocks) and ensure valid certification (Color coding).
• Select appropriate rigging gear for the load.
• Coordinate with Crane Operators.
• Ensure ground bearing pressure is sufficient for crane outriggers.

Requirements

• HND/Technical Diploma.
• Professional Certifications & Licenses
• OPITO/LEEA Level 3 or 4 Rigging Supervisor.
• NSITF Compliance knowledge.
• Minimum 10 years in lifting operations.

Technical Skills & Competencies

• Calculation of load weights and center of gravity (CoG).
• Interpretation of crane load charts.
• Zero dropped object incidents.
• Compliance with Lift Plans.
• Outdoor, often near heavy machinery.
• Excellent vision and spatial awareness.

6. EQUIPMENT TECHNICIANS/OPERATORS (UTC/WPQ)

• Department/Division:Plant & Machinery
• Reports To:Plant Manager / Maintenance Supervisor

Job Summary

This role involves operating and maintaining specialized industrial equipment, particularly those requiring Ultrasonic Testing capabilities (UTC) or Welding Procedure Qualification (WPQ) related machinery. (Note: This title implies a dual role of specialist operator/technician).

Responsibilities:

• Operate heavy machinery or specialized testing equipment.
• Perform routine maintenance and troubleshooting.
• Ensure equipment is calibrated and certified.
• Keep daily logs of equipment usage and engine hours.
• Assist in NDT operations or automated welding setups.

Requirements

• OND/HND in Mechanical/Electrical Engineering.
• Trade Test.
• Professional Certifications & Licenses
• Relevant Equipment Operator License.
• Specific OEM training certificates
• Minimum 5 years with specific machinery.

Technical Skills & Competencies

• Mechanical troubleshooting.
• Electrical schematics reading.
• Equipment availability (>95%).
• Mean Time Between Failures (MTBF).

7. COATING FOREMAN

• Department/Division:Corrosion Control
• Reports To: Coating Supervisor

Job Summary

The Coating Foreman directs the blasting and painting crew, ensuring technical specifications and safety protocols are followed.

Responsibilities:

• Assign tasks to blasters and painters.
• Check equipment (compressors, spray pumps, blast pots) functionality.
• Ensure correct surface preparation standards (SA 2.5, SA 3).
• Supervise mixing and thinning of paints.
• Enforce use of respirators and protective suits.

Requirements:

• Trade Test / NABTEB.
• Professional Certifications & Licenses
• NACE Level 1 (desirable).
• Minimum 5-7 years experience.

Technical Skills & Competencies

• Airless spray application techniques.
• Grit blasting techniques.
• Daily coverage area achieved.
• Material consumption vs. budget.

8. RIGGING FOREMAN

• Department/Division:Lifting & Hoisting
• Reports To:Rigging Supervisor

Job Summary

The Rigging Foreman leads the rigging crew during lifting operations, communicating signals to operators.

Responsibilities:

• Direct riggers in attaching loads.
• Act as the primary Banksman/Signaller for the crane operator.
• Verify load balance before full lift.
• Ensure exclusion zones (barricades) are established.
• Inspect rigging tackle before daily use.

Requirements

• Trade Test / NABTEB.
• Professional Certifications & Licenses
• OPITO/LEEA Level 1 or 2.
• Banksman/Slinger Certificate.
• Minimum 6 years experience.
• Technical Skills & Competencies
• Standard hand signals and radio communication protocols.

9. HSE OFFICER

• Department/Division: Health, Safety & Environment (HSE)
• Reports To:HSE Manager / Site Safety Lead

Job Summary

HSE Officer facilitate a culture of safety by observing, mentoring, and correcting unsafe behaviors on site. They ensure compliance with Nigerian Factories Act, NUPRC regulations, and company HSE policies, aiming for Goal Zero incidents.

Responsibilities

• Conduct daily Toolbox Talks (TBT) and safety briefings.
• Perform daily site inspections and HSE audits to identify hazards.
• Coach workforce on “Safe Systems of Work” and intervention techniques.
• Investigate accidents/incidents and near misses; prepare detailed reports using root cause analysis.
• Ensure compliance with Permit to Work (PTW) systems.
• Monitor the use of PPE and ensure availability of safety equipment.
• Liaise with regulatory bodies (DPR/NUPRC) during site visits.
• Conduct emergency drills (fire, muster, man-down) regularly.
• Maintain HSE statistics and records (Man-hours, LTI, TRC).
• Promote behavioral-based safety (BBS) programs.

Requirements:

• HND or B.Sc. in Science, Engineering, or Environmental discipline.
• NYSC Discharge Certificate.
• Professional Certifications & Licenses
• ISPON (Institute of Safety Professionals of Nigeria) Membership – Compulsory.
• NEBOSH International General Certificate (IGC).
• OSHA or IOSH Managing Safely.
• Minimum 4 years as an HSE Officer in heavy engineering or Oil & Gas projects.

Technical Skills & Competencies

• In-depth knowledge of Nigerian HSE laws and ISO 45001.
• Risk Assessment and JHA preparation skills.
• Incident Investigation and Reporting.
• First Aid and CPR competency.
• Number of BBS observations/interventions per week.
• Closure rate of corrective actions (>95%).
• Zero LTI (Lost Time Injury) on assigned shift.
• Training man-hours delivered.
• Timely submission of HSE reports.
• Active construction site environment (Onshore/Offshore).
• Exposure to weather elements
• Be Physical fit to climb heights and access confined spaces for inspection.
• Good visual acuity and hearing.

10. WELDING FOREMAN

• Department/Division:Construction / Fabrication
• Reports To:Welding Supervisor

Job Summary

The Welding Foreman acts as the direct leader of the welding crew, ensuring productivity and quality at the ground level. They translate the supervisor’s plans into action.

Responsibilities:

• Lead a team of welders in daily tasks.
• Ensure welders have the necessary tools, materials, and PPE.
• Check joint fit-ups prior to welding.
• Monitor welding parameters (voltage, amperage, travel speed) against WPS.
• Conduct Tool Box Talks focused on specific welding hazards.
• Ensure proper handling and return of stubs/unused consumables.
• Report daily production (diameter inches welded) to the Supervisor.
• Enforce housekeeping in welding habitats.

Requirements:

• Trade Test I, II, & III (Federal Ministry of Labour).
• NABTEB or City & Guilds in Welding & Fabrication.
• Professional Certifications & Licenses
• Previous coding/qualification in 6G positions.
• HSE Level 2.
• Minimum 7 years of welding experience with 2 years in a leadership role.

Technical Skills & Competencies

• Proficient in SMAW and GTAW processes.
• Ability to interpret blueprints and welding symbols.
• Leadership and conflict resolution skills.
• Crew daily weld production targets.
• Crew weld rejection rate.
• Zero safety violations by crew.
• Outdoor/Site based.
• Physical stamina and dexterity

11. FITTING FOREMAN

Department/Division: Mechanical / Piping

Reports To: Fitting Supervisor

Job Summary

The Fitting Foreman leads a crew of fitters, ensuring daily fabrication targets are met with precision and safety.

Responsibilities:

• Assign daily tasks to fitters.
• Verify measurements and cut lengths of pipes and steel.
• Inspect joint preparation (bevel angles) and fit-up alignment.
• Ensure correct orientation of valves and fittings as per drawings.
• Supervise rigging and lifting of spools into position.
• Maintain tool inventory for the crew.
• Enforce PPE compliance.

Requirements:

• Trade Test I, II, III in Pipe Fitting/Fabrication.
• NABTEB Technical Certificate.
• Minimum 7 years experience with 2 years leading a team.

Technical Skills & Competencies

• Strong ability to read ISO drawings.
• Proficient in using cutting torches and grinders.
• Daily fit-up production counts.
• Compliance with fit-up tolerances.
• Site based, outdoor environment.
• Physically demanding role involving lifting and positioning materials

12. MEDICAL RADIOGRAPHER

Job Summary:

To perform X-ray and ultrasound examinations for staff and act as the Nigerian Nuclear Regulatory Authority Designated Radiation safety Officer for the clinic.

• Department/Division/ Unit: Medical
• Location: Port Harcourt

Responsibilities

• Perform chest X-ray examination for medical fitness (Pre-employment and Periodical).
• Perform X-ray examinations for occupational and other medical illnesses as referred by the doctor.
• Perform ultrasound scans as referred by the doctor.
• Send reports to the attending doctor and document reports for recording keeping.
• Carry out routine quality control checks on the X-ray and ultrasound machines.
• Take daily readings of radiation level/dose within the X-ray room, the clinic and its vicinity and document for record keeping.
• Calibrate the radiation monitoring devices.
• Collaborate with the officials of the Nigerian Nuclear Regulatory Authority during the radiation monitoring yearly visit of the clinic.

Requirements

• B. Sc Radiography
• Professional Qualification:
• Certifications in Radiography and/or ultrasonography or its equivalent.
• Not less than 5 years post-graduation.
• Proficiency in operating X-ray and ultrasound machines.
• Skill in positioning patients and selecting appropriate imaging techniques for accurate diagnosis.
• Skill in interpretation of images.
• Skill in radiation protection.

Required Skills and Competencies

• In-depth knowledge of human anatomy.
• Ability to communicate clearly and empathically with patients of all backgrounds.
• Attention to details.
• Effective time management.
• Good teamwork

13. FIREWATCH

• Department/Division:HSE / Emergency Response
• Reports To:HSE Officer / Fire Chief

Job Summary

The Firewatch is responsible for monitoring hot work areas to prevent fires and ensure immediate response in case of ignition. They serve as the primary line of defence during welding, cutting, and grinding operations.

Responsibilities:

• Continuously monitor the hot work area for fire hazards before, during, and after operations (typically 30 mins post-work).
• Ensure appropriate fire extinguishers are available, charged, and correct for the hazard type.
• Inspect the hot work area to ensure flammable materials are removed or covered with fire blankets.
• Stop work immediately if a hazard arises or if conditions become unsafe.
• Sound the alarm in case of fire and attempt to extinguish small fires if safe to do so.
• Ensure hot work permits are valid and posted at the work site.
• Prevent unauthorized entry into the hot work zone.
• Communicate effectively with welders and supervisors.

Requirements:

• Minimum SSCE/WAEC/NECO.
• Trade Test Certificate is an added advantage.
• Professional Certifications & Licenses
• Basic Fire Fighting Training Certificate.
• Authorized Gas Tester (AGT) certification (desirable).
• HSE Level 1 (NISP).
• Minimum 1-2 years of experience in a similar role in construction or industrial sites.

Technical Skills & Competencies

• Practical knowledge of operating fire extinguishers (P.A.S.S technique).
• Ability to recognize fire hazards (Class A, B, C, D, K fires).
• Understanding of Gas Testing basics.
• Zero fire incidents during watch duty.
• 100% compliance with post-work monitoring times.
• Availability and readiness of fire equipment.
• High-heat environments, exposure to welding fumes and sparks.
• Standing for long periods.

14. STRUCTURAL WELDERS

• Department/Division:Fabrication
• Reports To:Welding Foreman

Job Summary

Structural Welders perform welding on beams, columns, plates, and other structural components using specified welding processes.

Responsibilities:

• Perform welding on structural steel components (Carbon Steel/Stainless Steel).
• Execute welds in positions (3G, 4G, 6G) as qualified.
• Clean and prepare surfaces before welding (grinding, brushing).
• De-slag and clean welds for inspection.
• Maintain welding equipment and cables in good condition.
• Follow all safety protocols regarding hot work and fire prevention.

Requirements:

• SSCE/WAEC.
• Trade Test Certificate (Ministry of Labour).
• Professional Certifications & Licenses
• Valid Welder Performance Qualification (WPQ) record.
• Relevant coded welder certificates (AWS D1.1 usually).
• Minimum 3-5 years of structural welding experience.

Technical Skills & Competencies

• Proficiency in SMAW (Stick) and FCAW processes.
• Ability to pass radiographic/ultrasonic testing.
• Pass rate of NDT inspections.
• Linear meters welded per shift.
• Use of full PPE including welding hoods and respirators.

15. SCAFFOLDING SUPERVISOR

• Department/Division:Civil / Access
• Reports To: Site Manager / HSE Manager

Job Summary

The Scaffolding Supervisor manages all scaffolding operations, ensuring safe erection, modification, and dismantling of access platforms in compliance with BS EN 12811 and Nigerian regulations.

Responsibilities:

• Design and plan scaffolding structures based on access requirements.
• Supervise erection and dismantling of scaffolds.
• Inspect all scaffolds (Scafftag system) ensuring they are safe for use (Green Tag).
• Ensure compliance with TG20:13 and SG4:15 standards.
• Manage scaffolding material inventory.
• Conduct risk assessments for complex scaffolding (cantilevers, hanging scaffolds).
• Lead the scaffolding rescue team.

Requirements

• HND/OND in Civil Engineering or related field.
• Professional Certifications & Licenses
• CITB Advanced Scaffolder or equivalent.
• Scaffolding Inspection Certificate (CISRS/STI).
• Minimum 8-10 years in scaffolding, with 3 years as Supervisor.

Technical Skills & Competencies

• Load calculation for scaffold structures.
• Knowledge of tube & fitting and system scaffolds (Cuplok/Layher).
• Zero scaffold collapses or failures.
• Timeliness of scaffold availability for other trades.
• Accuracy of Scafftag records.

16. STOREKEEPER

• Department/Division: Logistics & Supply Chain / Warehouse
• Reports To:Logistics Manager / Warehouse Superintendent

Job Summary

The Storekeeper is responsible for the efficient management of warehouse operations, including receiving, storing, issuing, and recording materials and equipment. This role ensures inventory accuracy and compliance with Nigerian Local Content material handling procedures and company HSE policies.

Responsibilities

• Maintain accurate records of all incoming and outgoing materials using inventory management software (e.g., SAP, Oracle).
• Inspect received goods for quality and quantity against purchase orders and waybills.
• Ensure proper segregation of materials, including hazardous substances, in compliance with MSDS and Nigerian environmental regulations.
• Conduct regular stock counts and reconcile physical stock with system records.
• Issue materials to site personnel upon receipt of approved Material Requisition Forms (MRF).
• Monitor stock levels and initiate re-order procedures to prevent project stoppages.
• Maintain a clean and organized warehouse environment (5S methodology).
• Coordinate with Logistics regarding the transport of materials to and from sites.
• Ensure security of the warehouse and prevent pilferage or unauthorized access.
• Report damaged or obsolete stock to management for write-off procedures.

Requirements:

• HND or B.Sc. in Supply Chain Management, Business Administration, or related field.
• Minimum of OND with extensive experience may be considered.
• NYSC Discharge Certificate or Exemption Letter.
• Professional Certifications & Licenses
• Certificate in Inventory Management or Supply Chain (CIPS Level 2/3 desirable).
• HSE Level 1 & 2 (ISPON/NISP).
• Minimum 3-5 years of experience in storekeeping within the Nigerian Oil & Gas or Construction sector.

Technical Skills & Competencies

• Proficiency in MS Office (Excel, Word) and Inventory Management Systems.
• Knowledge of material handling and preservation techniques.
• Understanding of incoterms and logistics documentation.
• Inventory Record Accuracy (IRA) > 98%.
• Zero safety incidents within the warehouse.
• Time to process Material Requisitions (< 4 hours).
• Zero stock-outs of critical consumables.
• Reduction in material wastage/spoilage.

17. SCAFFOLDING FOREMAN

• Department/Division:Civil / Access
• Reports To: Scaffolding Supervisor

Job Summary

The Scaffolding Foreman leads a gang of scaffolders to erect and dismantle scaffolds safely and efficiently.

Responsibilities:

• Direct the daily activities of the scaffolding crew.
• Ensure ground stability before erection begins.
• Verify all components (tubes, couplers, boards) are defect-free.
• Ensure crew uses fall arrest systems (harnesses) 100% of the time.
• Update Scafftags daily.
• Manage housekeeping of scaffolding materials.

Requirements

• Trade Test / NABTEB.
• Professional Certifications & Licenses
• CITB/CISRS Part 2 or Advanced.
• Minimum 6 years experience.
• Technical Skills & Competencies
• Knot tying and rope work.
• Reading scaffolding drawings.
• Adherence to erection schedule.
• Safety compliance of the gang.

18. FITTING SUPERVISOR

• Department/Division:Mechanical / Piping
• Reports To:Construction Superintendent

Job Summary

The Fitting Supervisor manages the layout, fabrication, assembling, and installation of piping and structural systems. They ensure dimensional accuracy and adherence to isometric drawings.

Responsibilities:

• Plan and direct fitting operations for piping and structural works.
• Interpret complex P&IDs, Isometrics, and General Arrangement (GA) drawings.
• Manage spools fabrication and erection sequences.
• Ensure proper alignment and fit-up tolerances (gap, hi-lo) before welding.
• Coordinate with materials department for availability of pipes, flanges, and fittings.
• Oversee hydro-test pack preparation and execution.
• Conduct competency assessment of fitters.
• Ensure calibration of measuring tools and equipment.

Requirements:

• HND in Mechanical Engineering or equivalent technical diploma.
• Trade Test I, II, III.
• Professional Certifications & Licenses
• Project Management basics is an advantage.
• HSE Certification.
• Minimum 10 years in piping/structural fitting, with 4 years as a Supervisor.

Technical Skills & Competencies

• Advanced blueprint reading and geometric calculations.
• Knowledge of flange management and torqueing procedures.
• Familiarity with ASME B31.3 codes.
• Fit-up accuracy (zero rework due to dimensional errors).
• Spool fabrication productivity (inch-dia/day).
• Successful hydro-tests.

19. WELDING SUPERVISOR

• Department/Division: Construction / Fabrication
• Reports To: Construction Manager / Superintendent

Job Summary

The Welding Supervisor oversees all welding activities, ensuring they meet project specifications, international codes (ASME, AWS), and Nigerian quality standards. They manage resources, productivity, and quality control of the welding team.

Responsibilities:

• Supervise daily welding activities and allocate tasks to foremen and welders.
• Ensure all welding is performed according to approved WPS (Welding Procedure Specifications).
• Monitor welder performance and qualification (WPQ) validity.
• Coordinate with QC Inspectors for NDT (Non-Destructive Testing) and visual inspections.
• Manage welding consumables (electrodes, filler wires) storage and issuance (baking/holding ovens).
• Resolve technical welding issues on site.
• Ensure compliance with HSE regulations regarding welding fumes, radiation, and electrical safety.
• Prepare daily progress reports and weld maps.
• Mentor and train local welders to meet NCDMB targets.

Requirements

• HND or B.Sc. in Mechanical/Metallurgical Engineering.
• Alternatively, extensive trade background with City & Guilds/NABTEB.
• Professional Certifications & Licenses
• CSWIP 3.1 or 3.2 Welding Inspector or AWS CWI.
• COREN registration (for Engineers).
• Minimum 8-10 years in welding fabrication/construction.
• At least 3 years in a supervisory role.

Technical Skills & Competencies

• Expert knowledge of welding processes (SMAW, GTAW, FCAW, SAW).
• Ability to read isometric drawings and welding symbols.
• Knowledge of metallurgy and heat treatment (PWHT).
• Weld Repair Rate (< 2% or as per project KPI).
• Schedule adherence for fabrication milestones.
• Consumable wastage (< 5%).
• Safety compliance of the welding crew.

20. SCAFFOLDERS

• Department/Division: Civil / Access
• Reports To: Scaffolding Foreman

Job Summary

Scaffolders erect and dismantle temporary metal scaffolding structures to provide access platforms for other workers.

Responsibilities

• Unload scaffolding materials and prepare the base.
• Fix uprights (standards), horizontals (ledgers), and diagonals (braces).
• Lay decking/planking and install toe-boards and guard rails.
• Dismantle scaffolding safely after use.
• Maintain safety harness tie-off at all times.

Requirements:

• SSCE/WAEC.
• Trade Test I, II, III.
• Professional Certifications & Licenses
• Basic Scaffolding Training (CITB/CISRS Part 1 desirable).
• Minimum 2-3 years experience.
• Technical Skills & Competencies
• Safe manual handling techniques.
• Teamwork.
• Key Performance Indicators (KPIs)
• Speed and safety of erection.
• Heights, exposed to weather.
• Balance, agility, and strength.
• Ability to inspect welds in difficult-to-access areas.

21. PERMIT FOCAL POINTS (AREA BASED)

• Department/Division:HSE / Operations
• Reports To: Permit Coordinator / Site Manager

Job Summary

The Permit Focal Point manages the Permit to Work (PTW) system for a specific site area, ensuring all high-risk activities are authorized and conflicting activities are managed.

Responsibilities:

• Receive and review PTW applications.
• Verify that Risk Assessments and JHAs are attached and adequate.
• Conduct site visits to verify isolation (LOTO) and gas test results before activation.
• Maintain a display board of active permits.
• Identify SIMOPS (Simultaneous Operations) conflicts.
• Audit closed permits for compliance.
• Coordinate with Area Authority for permit authorization.

Requirements:

• HND/B.Sc. in Engineering or Sciences.
• Professional Certifications & Licenses
• PTW System Certification (specific to IOCs like Shell, Chevron, etc.).
• NEBOSH IGC.
• Minimum 5 years in Oil & Gas operations.
• Understanding of Process Safety.
• Attention to detail.
• Accuracy of permit documentation.
• Zero incidents due to permit violations.

​​Method of Application

Interested and qualified candidates Should forward their CV to: recruitment@marconi.ng

Application Deadline: Wednesday, February 18, 2026